Posted   by 

Broadcom Bcm943xx Drivers For Mac

If you are looking for the Broadcom BCM 43XX drivers then you will find them below. There is a Windows Vista version of the drivers as well as a Windows 7/8/8.1 and another separate file for the Windows 10 drivers for the BCM43XX.

The single-chip dual-band transceiver integrates all the major functional blocks needed to implement a complete 802.11ac wireless sub-system, including radio, baseband and Media Access Control (MAC).

Note that you will need to download the driver, the one which covers your operating system and from there you will need to and install the driver from the file. This driver covers the BCM 43xx range of adapters such as the BCM4301 right up to and including the BCM4365 and everything in between. Check your hardware first before you install this driver. Note that all the drivers have a 32bit and 64bit version in the file. The following equipment has been listed:

  • Broadcom 802.11b/g WLAN
  • Broadcom 802.11a/b/g WLAN
  • The Broadcom 802.11 Network Adapter provides wireless local area networking.
  • Broadcom 802.11 Network Adapter Driver
  • Broadcom 4321AG 802.11a/b/g/n Wi-Fi Adapter
  • Broadcom 4322AG 802.11a/b/g/n Wi-Fi Adapter
  • Broadcom 43224AGN 802.11a/b/g/n 2×2 Wi-Fi Adapter
  • Broadcom 4313GN 802.11b/g/n 1×1 Wi-Fi Adapter
  • Broadcom 43225 802.11b/g/n
  • Broadcom BCM943228HM4L 802.11a/b/g/n 2×2 WiFi Adapter
  • Broadcom WLAN Adapter
  • Broadcom BCM943228HMB 802.11abgn 2×2 Wi-Fi Adapter
  • Broadcom BCM943228Z 802.11abgn 2×2 M.2 Wi-Fi Adapter
  • Broadcom BCM4352HMB 802.11ac 2×2 Wi-Fi Adapter
  • Broadcom BCM4352Z 802.11ac 2×2 Wi-Fi Adapter
  • Broadcom BCM43142 802.11 bgn Wi-Fi Adapter
  • Broadcom BCM43142 802.11 bgn Wi-Fi M.2 Adapter

It is highly recommended to always use the most recent driver version available. Try to set a system restore point before installing a device driver. The relevant driver has built-in logic to probe the actual chip, for broadcom wireless bcm43xx Did this problem not occur in a previous release? The bcmwl-kernel-source package should automatically blacklist the open source drivers so that the STA driver is the only one in use. But, with no Wifi or bluetooth support because Windows 10 have no drivers for the wifi and bluetooth adapter. I've tried to download the boot camp drivers from the Boot Camp Assistant software, no luck. Broadcom bcm43xx driver mac os x. SiS 650 IGUI Host Memory Use the links on this page to download the latest version of SiS Mirage 3 Graphics drivers. Broadcom Limited is a leading designer, developer and global supplier of a broad range of analog and digital semiconductor connectivity solutions that serve the. Can some buddy help to find wifi driver for Broadcom BCM94xx card for MAC LION. Or any other way to fix the issue. If you are looking for the Broadcom BCM 43XX drivers then you will find them below. There is a Windows Vista version of the drivers as well as a Windows 7/8/8.1 and another separate file for the Windows 10 drivers for the BCM43XX.

The files for these are below so check your operating system as well as your hardware before you download and install the driver in the packages which have been listed below for download.

Broadcom BCM43XX Driver (Vista)

Broadcom BCM43XX Driver (Windows 7/8/8.1)

Broadcom BCM43XX Driver (Windows 10)

Incoming search terms:

Drivers

Related Posts

  • Broadcom (WIDCOMM) Bluetooth Driver (1.000)
  • Broadcom Bluetooth Driver (Win 7) (1.000)
  • Broadcom Bluetooth Driver (Windows 10) (1.000)
  • IOGEAR GBU521 Bluetooth 4.0 USB Driver (0.560)
  • ASUS ROG GL551JK Wireless Drivers (0.560)
  • ASUS T300FA Tablet Transformer Drivers (0.560)
  • ASUS R752LN Laptop Bluetooth Driver (0.560)

toleda

Moderator
Joined
May 20, 2010
Messages
24,462
Motherboard
Asus Maximus VII Impact
CPU
Core i7-4770K
Graphics
RX 560 + HD4600
Mac
, ,
Classic Mac
, ,
Mobile Phone

Broadcom WiFi/Bluetooth [Guide]
WiFi and Bluetooth working out of box on macOS with Apple branded Broadcom BCM94360. Enables specific half mini and M.2 BCM94352 on macOS with methods described below. Credit: RehabMan
This thread does not support:
  • macOS/Continuity
  • Atheros/Qualcomm WiFi/Bluetooth
  • Intel CNVi Wifi/Bluetooth
Change Log
v1.1 - 10/26/2018: 10.14 support, AirportBrcmFixup replaces all previous WiFi methods
v1.0 - 1/5/2018: 10.13/Broadcom WiFi/Bluetooth support
Previous thread: [Guide] Airport - PCIe Half Mini v2/Deprecated
Broadcom WiFi + BT (2 antennas, except as noted)
  • PCIe/x1: BCM94360CD - native WiFi/ac and BT4LE (3 antennas)
  • PCIe/x1: BCM94331CD - native WiFi and BT4LE
  • M.2: BCM943602BAED/DW1830 - native WiFi/ac and BT4LE (3 antennas)
    • Laptop issues/solutions, see jaymonkey/Post #138
  • M.2: BCM94360CSAX - native WiFi/ac and BT4LE (3 antennas)
  • M.2: BCM943602CS - native WiFi/ac and BT4LE (3 antennas)
  • M.2: BCM94360CS2 - native WiFi/ac and BT4LE (2 antennas)
  • M.2: BCM94352Z/AzureWave AW-CE162NF/DW1560 - supports WiFi/ac and BT4LE
  • M.2: BCM94350ZAE/DW1820A - native WiFi/ac and BT4LE
  • Half mini: BCM94360HMB/AzureWave AW-CB160H - native WiFi/ac and BT4LE (3 antennas)
  • Half mini: BCM94352 HMB/AzureWave AW-CE123H - supports WiFi/ac and BT4LE
Requirements
  • macOS 10.11 or newer
  • Supported Broadcom WiFi/BT
  • Clover v4658 or newer
Broadcom WiFi/Bluetooth Repo
wireless_broadcom
I. Broadcom WiFi/BT Installation
WiFi Injection(10.14/10.13/10.12 /10.11)
  1. Remove all Wifi patches and kexts
    1. Clover fixes (config.plist/ACPI/DSDT/Fixes/)
    2. Clover patches (config.plist/KernelAndKextPatches/KextsToPatch/)
    3. WiFi kexts (/L/E and EFI/CLOVER/Kexts/...)
    4. WiFi ssdts and dsdt edits (EFI/CLOVER/ACPI/patched)
  2. AirportBrcmFixup/acidanthera
    1. All supported Broadcom WiFi cards
    2. README: acidanthera/AirportBrcmFixup
    3. Download:
    4. Install to /Library/Extensions/ with KextBeast:
      • AirportBrcmFixup.kext
      • Lilu.kext
      • Install latest versions as available
BT Injection(10.14/10.13/10.12 /10.11)
  1. BrcmPatchRAM/RehabMan
    1. All supported Broadcom WiFi cards
    2. Correctly configured USB, see [Guide] Creating a Custom SSDT for USBInjectAll.kext
    3. README: RehabMan/OS-X-BrcmPatchRAM
    4. Download: RehabMan / OS-X-BrcmPatchRAM
    5. Install to /Library/Extensions/ with KextBeast:
      • BrcmFirmwareRepo.kext
      • BrcmPatchRAM2.kext
      • Install latest versions as available
II. Capabilities
  1. See AirportBrcmFixup/README/Boot-args/Country Code
  2. See AirportBrcmFixup/README/Features
III. Tools - Mount EFI, IOReg, MaciASL, Xcode
  1. Community Software/EFI Mounter v3
  2. IORegistryExplorer_v2.1.zip (select View Raw, double click)
  3. DPCIManager (select View Raw, double click)
  4. Property List Editors
  • Property List Editor, PlistEdit Pro, etc.
  • TextEdit, TextWrangler (last resort)
IV. Problem Reporting - Post to this thread with requested information attached
  1. Description of WiFi/Bluetooth problem
  2. OS X version/motherboard model/BIOS version/processor/graphics
  3. Procedure/Guide used
  4. Copy of IOReg - IOReg_v2.1/File/Save a Copy As…, verify file (III. Tools 2.)
  5. Screenshots
    • DPCIManager/Status (III. Tools 3.)
    • System Information/Hardware/Network/WiFi
    • System Information/Hardware/Bluetooth
    • System Information/Hardware/USB (Select Bluetooth device)
  6. Clover (if installed)
    • EFI/CLOVER/config.plist
    • DPCIManager/Misc/Boot Log
    • EFI/CLOVER/ACPI/Patched/dsdt.aml (if WiFi edited)
    • EFI/CLOVER/ACPI/Patched/ssdt.aml (if WiFi edited)
  7. Put all files in a folder, compress and attach post on this thread
V. Requirements - macOS, native IO80211Family, Intel motherboards, SIP
  1. macOS
    1. 10.14+, see 4. SIP/1.
    2. 10.13+, see 4. SIP/1.
    3. 10.12+, see 4. SIP/1.
    4. 10.11+, see 4. SIP/1.
  2. Native IO80211Family.kext
    1. Remove any airport kext enabler
    2. Remove/Disable Clover Airport patches
      • config.plist/ACPI/DSDT/Fixes/FixAirport_4000/YES, set NO
      • config.plist/Devices/FakeID/Wifi/?, set 0x0
  3. Intel Motherboards
    1. Desktop 300/200/100/9/8/7/6 Series
    2. Workstation X299/X99/X79
  4. SIP (required to install/edit kexts and rebuild cache with unsigned kexts)
    1. System Integrity Protection (SIP)
    2. 10.13/10.12/10.11:
      • CLOVER/config.plist/RtVariables/
        • CsrActiveConfig/0x3 or 0x67
VI. Broadcom - WiFi and Bluetooth, PCIe, M.2 and Half Mini
Details - macOS/Native

Canon Printer Drivers For Mac


  • BCM94360CD, 2.4/5 GHz, ac+abgn, 3 Stream, 1300 Mbs + BT4LE (PCIe x1, not half mini)
  • BCM94331CD - 2.4/5 GHz, abgn, 3 stream, 450 Mbs + BT4LE (PCIe x1, not half mini)
Broadcom Device_IDs (Vendor_ID: 14e4)
  1. Supported Device_ID (native)
    • 0x43ba- BCM943602BAED - 2.4/5 GHz, ac+abgn, 3 Stream, 1300 Mbs + BT4.1LE
    • 0x43a3 - BCM94350ZAE - 2.4/5 GHz, ac+abgn, 2 Stream, 867 Mbs + BT4LE
    • 0x43a0 - BCM94360CD, 2.4/5 GHz, ac+abgn, 3 Stream, 1300 Mbs + BT4LE
    • 0x43a0 - BCM943602CS, 2.4/5 GHz, ac+abgn, 3 Stream, 1300 Mbs + BT4LE
    • 0x43a0 - BCM94360CS2, 2.4/5 GHz, ac+abgn, 2 Stream, 867 Mbs + BT4LE
  2. Supported Device_IDs (injection required)
    • 0x43b1 - BCM94352 HMB/Z, 2.4/5 GHz, ac+abgn, 2 stream, 867 Mbs + BT4LE
VII. Installed WiFi/BT?- Vendor ID, Product IDs
  1. Determine WiFi Card Device_ID
    • Download, install and run DPCIManager (III. Tools 3.)
    • Find Vendor-ID 14E4 (Broadcom) in DPCIManager/PCI
    • Note Device_ID and verify with supported Device_IDs above.
    • Example: Vendor/Device ID is 14E4/4357 > BCM943225
  2. Determine WiFi Card/Bluetooth ProductID/VendorID
    • System Information/Hardware/USB
    • Select '.. Bluetooth…'/BCM207020A
    • ProductID/Convert hex to decimal/Ex. 0x217d = decimal 8573
    • VendorID/Convert hex to decimal/Ex. 0x0a5c = decimal 2652 (Broadcom)
VIII. Deprecated Methods - No 10.14 Support
Clover Broadcom Patches/Download (View Raw)
config-bcm94352-130.plist.zip
I. Broadcom WiFi/BT Installation
WiFi Injection Methods (select one method, remove before installing a different method)
  1. kext enabler, FakePCIID/RehabMan
    • All supported Broadcom WiFi cards/AirPortBrcm4360.kext
    • README: RehabMan/OS-X-Fake-PCI-ID
    • Download: RehabMan / OS-X-Fake-PCI-ID
    • Install with kext installer to ~/Library/Extension:
      • FakePCIID.kext
      • FakePCIID_Broadcom_WiFi.kext
      • Install latest versions as available
    • Download config-bcm94352-1x0.plist.zip (above)
      • use AirPort.Brcm4360 patches (10.12)
    • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
      • 10.12+-BCM94352-fvco-darkvoid
      • 10.13/10.12 only
      • 10.11/10.10/10.9 patches - see VII. Previous macOS Support
  2. ssdt, 94352, see wireless_broadcom/ssdt_arpt
    • 10.13/Handoff not working with AirPort.BrcmNIC-MFG.kext
    • BCM94352 supported/AirPortBrcmNIC-MFG.kext
    • Verify IOReg/RP0x (wifi device name)
    • Select ssdt_arpt-rp0x-bcm4352
    • Download: select View Raw
    • Install to EFI/CLOVER/ACPI/patched/
    • Download config-bcm94352-1x0.plist.zip (above)
    • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
      • 10.13-BCM94352-fvco-darkvoid-Sherlocks
      • 10.13 only
      • 10.12/10.11/10.10/10.9 patches - see VII. Previous macOS Support
  3. kext, AirportBrcmFixup.kext/acidanthera
    • All supported Broadcom WiFi cards/AirPortBrcmNIC.kext
    • AirportBrcmFixup.kext/README: acidanthera/AirportBrcmFixup
      • Download: Releases · acidanthera/AirportBrcmFixup
      • See README/Boot-args, add to config.plist/Boot/Arguments/
    • Lilu.kext/README: acidanthera/Lilu
      • Download: Releases · acidanthera/Lilu
    • Install to EFI/CLOVER/kexts/Other/ or or kext installer to /Library/Extensions/:
      • AirportBrcmFixup.kext
      • Lilu.kext
      • Install latest versions as available
    • Non native/inject Brcm device_id (one method)
      • config.plist/Devices/FakeID/WIFI/0x43a014e4
II. Additional Capabilities - Handoff, 'Airport Extreme,' Country Code, Whitelist
Handoff (10.13/10.12/10.11 - all versions, 10.10 - see VII. Previous macOS Support)
  1. Requires AirPortBrcm4360, AirPortBrcmNIC or AirPortBrcmNIC-MFG/WiFiE
  2. Patches/Credit: lisai9093, #346 Airport - PCIe Half Mini
    • Binary patch: IOBluetoothFamily
      • Find: 48 85 FF 74 47 48 8B 07
      • Replace: 41 BE 0F 00 00 00 EB 44
  3. Installation
    • FakePCIID_Broadcom_WiFi.kext - working
      • Download config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.11+-BT4LE-Handoff-Hotspot-lisai9093
    • Clover/kext patch - 10.13/not working
      • Download config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.11+-BT4LE-Handoff-Hotspot-lisai9093
    • AirportBrcmFixup.kext/native - working
      • com.apple.driver.AirPort.BrcmNIC
'Airport Extreme' (10.13/10.12/10.11/10.10 - all versions)
  1. Requires AirPortBrcm4360, AirPortBrcmNIC or AirPortBrcmNIC-MFG/WiFi (non Apple branded, cosmetic)
  2. Patches/Credit: Credit: Skvo, Post #135, Airport - PCIe Half Mini
    • Binary patch: AirPortBrcm4360
      • Find: 6B 10 00 00 75 0D
      • Replace: 6B 10 00 00 90 90
  3. Installation (one method only)
    • FakePCIID_Broadcom_WiFi.kext/native
    • Clover/kext patch
      • Download config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.10+-BCM94352-Airport-Extreme-skvo
    • AirportBrcmFixup.kext/native
ROW/WiFi Country Code (10.13/10.12/10.11/10.10 - all versions)
  1. Requires AirPortBrcm4360, AirPortBrcmNIC or AirPortBrcmNIC-MFG/WiFi (4 cases, only one applies)
    • Native: US/FCC (Hex: 55 53)
    • If not US/FCC, see Sebinouse, see #2 below
    • Special case/#a, see jaymonkey, Post # 2084 [Guide] Airport - PCIe Half Mini v2, (UK: solves wake from sleep WiFi performance issue)
    • Special case/XT, see Skvo/Post #837/[Guide] Airport - PCIe Half Mini v2
  2. Patches/Credit: Sebinouse, Post #1159/[Guide] Airport - PCIe Half Mini v2
    • Binary patch: AirPortBrcm4360 (one patch only)
      • Find: 41 83 FC FF 74 2C 48
        • Replace: 66 C7 06 55 53 EB 2B (55 53 - US)
        • Replace: 66 C7 06 xx xx EB 2B (xx xx - your CC)
        • Replace: 66 C7 06 23 61 EB 2B (#a, special case)
      • Find: 58 54 00 2B 18 2C 21 00 20 (XT/ROW, special case)
        • Replace: 58 54 00 0A 36 1C 47 00 0A
    • Valid AirPortBrcm4360 CCs:
      • AE AF AR AT AU AZ BD BE BG BN BR BT BY CA CH CL CN CO CR CY CZ DE DK DO EC EE EG ES FI FR GB GR GT GU HK HN HR HU ID IE IL IN IS IT JM JO JP KH KR KZ LA LI LK LT LU LV MA MM MN MO MT MV MX MY NI NL NO NP NZ PA PE PH PK PL PR PT PY RO RS RU SA SE SG SI SK SV TH TR TT TW UA US UY VE VI VN ZA
      • Convert CC to Hexadecimal - ASCII to Hex (i.e., US > 55 53)
  3. Installation
    • FakePCIID_Broadcom_WiFi.kext
      • Download config-bcm94352-1x0.plist.zip (above)
        • use AirPort.Brcm4360 patches (10.12)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.10-10.11-BCM94352-5GHz-US-FCC-darkvoid
          • 10.12 US/FCC native, no patch required
        • edit BCM943xx/US-FCC for CC (above)
        • 10.11+-BCM94352-CC=#a-Ramalama
        • 10.11+-BCM94352-CC=XT-Skvo
    • Clover/kext patch (not tested)
      • Download config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.13-BCM94352-CC-Sebinouse-(edit 55 53 to CC)-PMheart
          • 10.13 US/FCC native, no patch
        • edit BCM943xx/US-FCC for CC (above)
        • 10.13-BCM94352-CC=#a-Ramalama
        • 10.13-BCM94352-CC=XT-Skvo
    • AirportBrcmFixup.kext
      • config.plist/Boot/Arguments/Boot-arg 'brcmfx-country=CC
WiFi Whitelist (10.13/10.12/10.11/10.10 - all versions)
  1. Requires AirPortBrcm4360, AirPortBrcmNIC or AirPortBrcmNIC-MFG/WiFi
    • Skvo, Post #115/Airport - PCIe Half Mini
    • Whitelist
      • MacBookAir5,2/BCM94331xx (0x4331)
      • iMac14,3/BCM943224xx (0x4353)
  2. Patch/Disable Whitelist/Credit: RehabMan, Post #1722/[Guide] Airport - PCIe Half Mini v2
    • Binary patch: AirPortBrcm4360
      • Find: 31 DB 4C 3B 65 D8 75 12
      • Replace: 31 DB FF C3 90 90 90 90
  3. Installation
    • FakePCIID_Broadcom_WiFi.kext
      • Download config-bcm94352-1x0.plist.zip (above)
        • use AirPort.Brcm4360 patches (10.12)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.11+-Disable-Whitelist-check-RehabMan
    • Clover patch (not tested)
      • Download config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.13-Disable-Whitelist-check-RehabMan
    • AirportBrcmFixup.kext/native
V. Requirements
  1. macOS
    1. 10.10+, see 4. SIP/2.
    2. 10.9+
    3. 10.8.5+
  2. SIP (required to install/edit kexts and rebuild cache with unsigned kexts)
    1. 10.10:
      • Clover/config.plist/Boot/Arguments/kext-dev-mode=1
VI. Broadcom
Details - macOS/NativeEpson
  • BCM943224 HMB, 2.4/5 GHz abgn, 2 Stream, 300 Mbs + BT3
Broadcom Device_IDs (Vendor_ID: 14e4)
  1. Supported Device_ID (native)
    • 0x4353 - BCM943224 HMS, 2.4/5 GHz abgn, 2 Stream, 300 Mbs
      • 10.10+/Whitelist
    • 0x4331 - BCM94331CD - 2.4/5 GHz, abgn, 3 stream, 450 Mbs + BT4LE
      • 10.10+/Whitelist
  3. Supported Device_IDs (injection required)
    • 0x4357 - BCM943225 HMB, 2.4 GHz, bgn, 2 stream, 100 Mbs + BT3
  4. Unsupported Device_ID
    • 0x4359 - BCM943228 HMB, 2.4/5 GHz, abgn, 2 stream, 300 Mbs + BT4
VII. Previous macOS Support
WiFi/94352 (10.12/10.11/10.10/10.9 - all version)

Hp Drivers For Mac


  1. 10.12 - fvco
    1. Credit: the-darkvoid #1, [FIX] macOS Sierra DP1 BCM94532Z WiFi
    2. Binary patch: AirPortBrcm4360
      • Find: 81 F9 52 AA 00 00 75 29
      • Replace: 81 F9 52 AA 00 00 66 90
    3. Installation
      • Clover/kext patchDownload (View Raw):
        • config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.12-BCM94352-fvco-darkvoid
  2. 10.11/10.10 - 5 GHz
    1. Credit: the-darkvoid #973, [Guide] Airport - PCIe Half Mini v2
    2. Binary patch: AirPortBrcm4360
      • Find: 41 83 FC FF 74 2C 48
      • Replace: 66 C7 06 55 53 EB 2B
    3. Installation
      • Clover/kext patchDownload (View Raw):
        • config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.10-10.11-BCM94352-5GHz-US-FCC-darkvoid
  3. 10.9 - 5 GHz
  • Credit: Skvo #246, [Guide] Airport - PCIe Half Mini v2
  • Binary patch: AirPortBrcm4360
    • Find: 01 58 54
    • Replace: 01 58 58
  • Installation
    • Clover/kext patchDownload (View Raw):
      • config-bcm94352-1x0.plist.zip (above)
    • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
      • 10.9-BCM94352-5 GHz - Skvo
BT (10.10/10.9 - all versions)
  1. kext enabler, BrcmPatchRAM/darkvoid
  2. Releases · robvanoostenrijk/BrcmPatchRAM · GitHub
    • BrcmPatchRAM.kext
  3. Installation (1 or 2, not both)
    • Clover/EFI/CLOVER/kexts/10.10 (or 10.9)
    • /System/Library/Extensions
BT Handoff (10.10 - all versions)
  1. Patch/Credit: Dotkterdok
    1. 10.10.2 and newer: Handoff (working)/Hotspot (not tested)
      1. Binary patch: IOBluetoothFamily
        • Find: 48 85 C0 74 5C 0F B7 48
        • Replace: 41 BE 0F 00 00 00 EB 59
    2. 10.10 and 10.10.1, Handoff (working)/Hotspot
      1. Binary patch: IOBluetoothFamily
        • Find: 8B 87 8C 01 00 00
        • Replace: B8 0F 00 00 00 90
  2. Installation
    1. Clover/kext patch
      1. Download (View Raw): config-bcm94352-1x0.plist.zip (above)
      2. Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.10-10.10.1-BT4LE-Handoff-Hotspot-Dokterdok
        • 10.10.2+-BT4LE-Handoff-Hotspot-Dokterdok

Credit
Broadcom Bcm943xx Drivers For MacTHe KiNG http://www.projectosx.com/forum/index.php?showtopic=1416
Andy Vandijck http://www.insanelymac.com/forum/index.php?showtopic=234570
Skvo Broadcom BCM94352HMB - the new flagship of kombomoduley supporting 802.11ac (41855) | AppleLife
Skvo, #758/[Guide] Airport - PCIe Half Mini v2
the-darkvoid [FIX] macOS Sierra DP1 BCM94532Z WiFi
lisai9093, #346 Airport - PCIe Half Mini
Sherlocks, #297, [pre-release] macOS High Sierra
RehabMan, #90[/size]